Sony announces 22MP camera sensor, built-in hybrid autofocus

Tokyo: Sony Corporation is announcing the commercialization of a new Exmor RS image sensor for smartphones and other devices that require increasingly better cameras and thinner form factors. The IMX318 is a type 1/2.6 stacked CMOS image sensor with 22.5 effective megapixels, and it boasts a more compact size, greater image quality, and higher performance. This new Exmor RS is the industry's first to be equipped with built-in high-speed hybrid autofocus ("AF"), as fast as 0.03 seconds, and built-in 3-axis electronic image stabilization technology for video. Sony aims to begin shipments for this new CMOS image sensor in May, 2016.

Check out the demo videos with the new camera:

Hybrid AF video:

With 3-axis image stabilization:

The IMX318 boasts a stacked structure and the industry's smallest unit pixels, which measure 1.0μm (micrometers) in size. With this, the image sensor achieves a compact, type 1/2.6 size suitable for inclusion into smartphones, while still realizing a high resolution of 22.5 effective megapixels, among the top in the industry. This new image sensor not only boasts enhanced resolution, but it also matches its predecessor in image quality despite the IMX318's smaller size and unit pixels (IMX230 predecessor model: type 1/2.4 sensor with 1.12μm unit pixel size). Additionally, Sony has succeeded in equipping the IMX318 with cutting-edge digital imaging features, namely high speed built-in hybrid AF and 3-axis electronic image stabilization for video, a first for the industry. With this image sensor, the user can capture image stills of those decisive moments reliably in high quality, as well as high resolution video without fear of blur.

Main Features

The industry's smallest unit pixel size at 1.0μm, achieving compact size (type 1/2.6) while realizing 22.5 effective megapixels high resolution

As smartphones grow ever thinner, so too are image sensors growing increasingly more compact. In line with this trend, Sony has developed a miniscule 1.0μm pixel sensor that, despite its small size, realizes high image quality. To accomplish this, Sony employed manufacturing technology that improves light utilization efficiency, as well as circuit design technology that eliminates noise, a root cause of deterioration in image quality. With this innovation, Sony has realized an image sensor that delivers high quality images, while also boasting small optical size and a high resolution of 22.5 megapixels. Night shots have long been a weak point for the compact cameras used in smartphones, with the lack of light translating into excessive visual noise. The IMX318 addresses this weakness and realizes beautiful photography in nighttime conditions.

The industry's first image sensor with built-in hybrid AF, as fast as 0.03 seconds, and 3-axis electronic image stabilization

Hybrid AF:

Hybrid AF, which merges image plane phase detection AF with contrast detection AF, has previously been realized through the combination of an image sensor and an application processor. But with the IMX318, Sony has created the industry's first stacked CMOS image sensor with hybrid AF built into the sensor's internal signal processor. The IMX318 leverages Sony's high-speed AF technology that has been honed over many years, boasting an AF as fast as 0.03 seconds (and as fast as 0.017 seconds when shooting video at 60fps). With this power in hand, the user can capture those decisive moments reliably in focus, whether shooting stills or video.

3-axis electronic image stabilization for video:

With the IMX318, Sony has also created the industry's first stacked CMOS image sensor with image stabilization functionality built into its internal signal processor. This sensor leverages the image stabilization technology that Sony has cultivated over its years developing cameras, realizing smooth 4K videos with little camera shake by making effectively use of the signal output obtained from the external 3-axis (pitch, yaw, and roll) gyro sensor. Sony's unique image stabilization technology incorporated into the IMX318 corrects not only camera shake, but also lens distortion, making for more beautiful videos. Furthermore, because image stabilization is achieved by processing within the hardware of the image sensor, less power is used than when it is accomplished by software processing in the external application processor. Since it enables smooth video shooting, this image sensor is suited for incorporation into not only smartphones, but also a variety of other products that tend to generate substantial camera shake, such as aerial drones used for image capture.

4K and high frame rate video recording, through high-speed communications leveraging the latest MIPI specifications

Sony elected to adopt the MIPI (Mobile Industry Processor Interface) Alliance's latest C-PHY 1.0/D-PHY 1.2 specifications for this image sensor's interface. With this interface, the IMX318 is able to achieve more power efficient and faster data transmission from the image sensor to the application processor. As a result, even at the high resolution of 22.5 megapixels, transmission is realized for all pixels at 30fps. This enables seamless switching between high resolution video and still image photography, realizing the best of both worlds. Since the image sensor can transmit greater-than-4K resolution images for all pixels to the application processor, the user can capture 22.5 megapixel still images even while in the middle of recording video in 4K @30fps.

Key Specifications:

• Model name: IMX318
• Effective pixel count: 5488 (H) x 4112 (V) 22.5 megapixels
• Image size: Diagonal 6.858mm (Type 1/2.6)
• Unit cell size      1.00μm (H) x 1.00μm (V)
• Frame rate: Full - 30fps, Movie - 4K (3840 x 2160) @30fps, 1080p @120fps, 720p @240fps
• Sensitivity (standard value: F5.6): 61mV
• Sensor saturation signal (minimum value): 330mV
• Power supply: Analog 2.8V
• Digital: 1.05V
• Interface: 1.8V
• Key features: Hybrid AF, 3-axis image stabilization for video, HDR imaging, lens resolution correction, white spot correction, NR
• Output: MIPI C-PHY 1.0 (3 trio) / D-PHY 1.2 (4 lane)
• Image format: Bayer RAW